Our bespoke service allows you to have your belt made to measure; we are able to make belts to fit up to a 57" waist.
We are also able to alter widths of belt from the ones shown, though not all buckles are available in all sizes, please call to discuss.
Please note: To fit through the belt loops on most jeans, a width fitting of one and a quarter inches is the standard width for most jean belt loops and one and a half inches is the max.
How to measure for a bespoke belt.
Use one of the two methods listed:
- If you have an existing belt, measure from the point the leather turns around the buckle to the hole you use most often, this measurement will become the centre hole on your new belt.
- Wearing the trousers or skirt the belt is to be used with, take a fabric tape and place it through the belt loops, and then measure around. This measurement will become the centre hole on your new belt.
Prices for standard measurements as listed, to have a larger belt made please contact us for a price. Post and packaging not included.
Brass buckles, all these 5 are available in widths of one inch, one and a quarter inches, one and a half inch inches
Burford, showing dark
havanna leather, £35
Moreton, conker leather,
nut leather, £35
Langford, dark havanna,
Bourton, Australian nut,
Stainless steel, available in one inch, one and a quarter, one and a half
Bampton, black, £35
Wide belts - brass
Moreton, one and three quarters, and two inch
Stow, one and three quarters and two inch
Swinbrook, one and three quarter inches
Aston, two inch
Moreton, Conker, £45
Nickel plated brass
Clanfield, two inch
Clanfield, Dark Havanna, £45
Care of belts
Good leather will get more supple with age, but we recommend feeding the leather with a good quality leather cream every once in a while, especially if the leather has got wet or very dry. Never dry leather out quickly if it has got wet as this may cause it to crack. Brass buckles can be polished with brass cleaner.